Chipz is a chiptune-inspired eurorack synth module, which will take you back to the halcyon sounds of the ‘80s. Cre8audio started out the idea that Chipz would be a 3 oscillator synth that takes you to an alternate universe in which your old console isn't for playing video games but is a module in your eurorack compatible system, the idea evolved into something a bit higher resolution with a bunch more horsepower.
Cre8audio describe chips as ideal for those who speak “bleep blop”. They say that Chipz is “full of heaping piles of beeps, blops, and probably some other stuff too. It’s got a couple of voices and some wacky LFO junk, perfect for getting your body wobbling”
Putting all of that into language you might understand a little more, Chipz is a dual VCO and dual LFO module with each offering sine, triangle, saw, square and noise waveforms.
Useable case area = 84hp
Internal depth = 55mm
Weight = 1.8kg
6.8cm x 44.6cm x 18.6cm
Range of cv out 1 = 0-10V
Range of cv out 2 = 0-10V
Voltage output gate 1 - off =0 on =5（off = 0 on = 4.65）
Voltage output gate 2 - off =0 on =5（off = 0 on = 4.65）
Voltage output mod = 1-10V
Voltage output clock - off =0 on =5
Power output for modules
+12V - 1500mA peak output**
-12V - 500mA peak output**
+5V - 500mA peak output**
1/4” ts mono output on rear
MIDI in via USB and 5 pin Din
MIDI thru via 5 Pin Din and USB
Included in the box
* Please note that the right and left sides of NiftyCASE fit very flush. It is recommended to favor a module with a pcb 1mm or more narrower than it’s front panel for use on the left and right sides of the case (this amount or more of tolerance is fairly common on many modules). See example
** The NiftyCASE power supply is designed only to power modules that are being used in the NiftyCASE. Modifying the case or using it otherwise to power external cases & external modules is not advised. Additionally, we’ve seen that many modules reported power consumption are not precise. We recommend when planning what modules to use in your case, to allot at least an additional 25% power for modules that require additional power for startup and/or for variances from their reported specifications.
No customer reviews for the moment.
Stephan ValkærTfl: +45 91 52 45 45 firstname.lastname@example.org